Module:Radix

From Nguhcraft Wiki
Revision as of 01:30, 9 October 2026 by Astaryuu (talk | contribs)
Jump to navigation Jump to search

Documentation for this module may be created at Module:Radix/doc 

local r = {}

r.decimal_to = function(frame)
	digits = {}
	digitchars = {}
	
	-- Get number (in base 10)
	decimal = tonumber(frame.args[1])
	-- If decimal is 0 or 1, return decimal
	if decimal == 0 or decimal == 1 then 
		return tostring(decimal)
	end
	
	-- Separator
	format_output = format_output and format_output or true
	thousands = thousands and thousands or ","
	point = point and point or "."
	
	-- Get radix to convert to
	radix = tonumber(frame.args[2])
	-- sign is equal to sign(decimal) if radix is positive, and 1 otherwise
	sign = radix > 0 and decimal / math.abs(decimal) or 1
	-- If radix is not an integer: Round to nearest integer for now
	radix = radix < 0 and math.ceil(radix) or math.floor(radix)
	-- If abs(radix) is 1, 0, or > 36, return decimal 
	if radix == 0 or math.abs(radix) == 1 or math.abs(radix) > 36 then 
		return tostring(decimal)
	end
	
	-- characters are based on other proglangs' parsing
	characters = numerals and numerals or "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"
	
	-- precision is the number of digits below 1 to use
	-- if decimal is less than 1/radix ^ precision, return 0
	precision = tonumber(frame.args[3]) or 0
	minpower = radix ^ (precision * -1)
	if math.abs(decimal) < minpower then
		return "0"
	end
	
	-- maxpower calculation
	maxpower = radix ^ math.ceil(math.log(math.abs(decimal + 0.0))/math.log(math.abs(radix + 0.0)))
	-- if decimal < 0 then maxpower should be 1
	
	-- calculate digits
	digitval = maxpower
	i = 1
	-- format radix and set up num of integral digits for possible formatting
	if radix > 0 then decimal = math.abs(decimal) end
	integrals = 0
    nextdigitcarry = false
	while math.abs(digitval) >= math.abs(minpower) do
		-- get floor of abs(decimal) / abs (digitval)
		thisdigit = digitval < 0 and math.ceil(math.abs(decimal)/digitval) or math.floor(math.abs(decimal)/digitval)
        thisdigitsign = digitval / math.floor(digitval)
        -- if thisdigit is negative, flip it and set nextdigitcarry to true
        -- otherwise, set it to false
        if nextdigitcarry then
            thisdigit = math.abs(thisdigit) + 1
            if digitval == 1 then thisdigit = thisdigit - 1 end
            nextdigitcarry = true
        else
            nextdigitcarry = false
        end
        -- if i is 1 and thisdigit is 0:
		-- if radix is negative and digitval is positive, add 1 to thisdigit
		-- if radix is positive and maxpower isn't 1, skip
		add_digit = true
		if thisdigit == 0 and i == 1 then
            if radix < 0 and digitval > 0 then
                thisdigit = 1
                nextdigitcarry = true
			else
                if math.abs(maxpower) > 1.0 then
				    add_digit = false
                end
			end
		end
		if add_digit then
			-- add thisdigit to digits
			digits[i] = thisdigit
			-- subtract thisdigit * digitval from decimal
			decimal = decimal - thisdigit * digitval
			if digitval >= 1 then integrals = integrals + 1 end
			-- add this digit to assembled string
		    i = i + 1
		end
		digitval = digitval / radix
	end
	
	-- if sign is -1, append a negative sign to the front
	signchar = sign == -1 and "-" or ""
	ret = "" .. signchar
	
	-- assemble digits
	separators = 0
	distance = math.abs(radix) <= 6 and 4 or math.abs(radix) <= 20 and 3 or 2
	for j,digit in ipairs(digits) do
		digitchars[j+separators] = string.sub(characters, digit+1, digit+1)
		-- when integrals - j is a positive multiple of distance
		if format_output then
			if j < integrals and (integrals - j) % distance == 0 then
				-- add "," and 1 to separators
				separators = separators + 1
				digitchars[j+separators] = thousands
			end
		end
		-- when j equals integrals and precision > 0
		if j == integrals and precision > 0 then
			-- add "." and 1 to separators
			separators = separators + 1
			digitchars[j+separators] = point
		end
	end
	
	-- assemble final number
	for k,character in ipairs(digitchars) do
		ret = ret .. character
	end

	return ret
end

-- The following function is decimal_to but with the args all inline
-- Some checks are removed or changed, as this function is intended for use in translation to other positional notation systems
r.decimal_to_inline = function(frame)
	digits = {}
	digitchars = {}
	
	-- Get number (in base 10)
	decimal = tonumber(frame.args[1])
	
	-- Separator
	format_output = frame.args[5] and frame.args[5] or true
	thousands = frame.args[6] and frame.args[6] or ","
	point = frame.args[7] and frame.args[7] or "."
	
	-- Get radix to convert to
	radix = tonumber(frame.args[2])
	-- sign is equal to sign(decimal) if radix is positive, and 1 otherwise
	sign = radix > 0 and decimal / math.abs(decimal) or 1
	-- If radix is not an integer: Round to nearest integer for now
	radix = radix < 0 and math.ceil(radix) or math.floor(radix)
	
	-- characters are based on other proglangs' parsing
	characters = frame.args[4] and frame.args[4] or "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"
	-- If abs(radix) is 1, 0, or > characters length, set radix to 10
	if radix == 0 or math.abs(radix) == 1 or math.abs(radix) > string.len(characters) then 
		radix = 10
	end
	
	-- precision is the number of digits below 1 to use
	-- if decimal is less than 1/radix ^ precision, return 0
	precision = tonumber(frame.args[3]) or 0
	minpower = radix ^ (precision * -1)
	if math.abs(decimal) < minpower then
		return "0"
	end
	
	-- maxpower calculation
	maxpower = radix ^ math.ceil(math.log(math.abs(decimal + 0.0))/math.log(math.abs(radix + 0.0)))
	-- if decimal < 0 then maxpower should be 1
	
	-- calculate digits
	digitval = maxpower
	i = 1
	-- format radix and set up num of integral digits for possible formatting
	if radix > 0 then decimal = math.abs(decimal) end
	integrals = 0
    nextdigitcarry = false
	while math.abs(digitval) >= math.abs(minpower) do
		-- get floor of abs(decimal) / abs (digitval)
		thisdigit = digitval < 0 and math.ceil(math.abs(decimal)/digitval) or math.floor(math.abs(decimal)/digitval)
        thisdigitsign = digitval / math.floor(digitval)
        -- if thisdigit is negative, flip it and set nextdigitcarry to true
        -- otherwise, set it to false
        if nextdigitcarry then
            thisdigit = math.abs(thisdigit) + 1
            if digitval == 1 then thisdigit = thisdigit - 1 end
            nextdigitcarry = true
        else
            nextdigitcarry = false
        end
        -- if i is 1 and thisdigit is 0:
		-- if radix is negative and digitval is positive, add 1 to thisdigit
		-- if radix is positive and maxpower isn't 1, skip
		add_digit = true
		if thisdigit == 0 and i == 1 then
            if radix < 0 and digitval > 0 then
                thisdigit = 1
                nextdigitcarry = true
			else
                if math.abs(maxpower) > 1.0 then
				    add_digit = false
                end
			end
		end
		if add_digit then
			-- add thisdigit to digits
			digits[i] = thisdigit
			-- subtract thisdigit * digitval from decimal
			decimal = decimal - thisdigit * digitval
			if digitval >= 1 then integrals = integrals + 1 end
			-- add this digit to assembled string
		    i = i + 1
		end
		digitval = digitval / radix
	end
	
	-- if sign is -1, append a negative sign to the front
	signchar = sign == -1 and "-" or ""
	ret = "" .. signchar
	
	-- assemble digits
	separators = 0
	distance = math.abs(radix) <= 6 and 4 or math.abs(radix) <= 20 and 3 or 2
	for j,digit in ipairs(digits) do
		digitchars[j+separators] = string.sub(characters, digit+1, digit+1)
		-- when integrals - j is a positive multiple of distance
		if format_output then
			if j < integrals and (integrals - j) % distance == 0 then
				-- add "," and 1 to separators
				separators = separators + 1
				digitchars[j+separators] = thousands
			end
		end
		-- when j equals integrals and precision > 0
		if j == integrals and precision > 0 then
			-- add "." and 1 to separators
			separators = separators + 1
			digitchars[j+separators] = point
		end
	end
	
	-- assemble final number
	for k,character in ipairs(digitchars) do
		ret = ret .. character
	end

	return ret
end

local function unpack_ipairs(t)
	local i = 0
	return function()
		i = i + 1
		if t[i] then
			return i, unpack(t[i])
		end
	end
end

-- To Kardonian shorthand; not great but it should hopefully work
r.to_kard = function(frame)
	number = tonumber(frame.args[1])
	truncated_number = number < 0 and math.ceil(number) or math.floor(number)
	is_mixed = 0
	frame0 = {}
	frame0.args = {number, 64, 0, "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/", false}
	frame1 = {}
	frame1.args = {number, 64, 1, "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/", false}
	frame2 = {}
	frame2.args = {number, 64, 2, "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/", false}
	if number == truncated_number then
		-- base 64
		base64encoded = r.decimal_to_inline(frame0)
	else
		is_mixed = 1
		-- is it at most 2 digits long?
		new_truncated_number = number < 0 and math.ceil(number/64) or math.floor(number/64)
		if number == new_truncated_number then
			base64encoded = r.decimal_to_inline(frame1)
		else
			is_mixed = 2
			-- assume 4 digits is enough
			base64encoded = r.decimal_to_inline(frame2)
		end
	end
    final_string = "" .. base64encoded
	-- reencode to base 8
	for i, stringin64, stringin8 in unpack_ipairs {
		{"A",""},{"B",""},{"C",""},{"D",""},{"E",""},{"F",""},{"G",""},{"H",""},
		{"I",""},{"J",""},{"K",""},{"L",""},{"M",""},{"N",""},{"O",""},{"P",""},
		{"Q",""},{"R",""},{"S",""},{"T",""},{"U",""},{"V",""},{"W",""},{"X",""},
		{"Y",""},{"Z",""},{"a",""},{"b",""},{"c",""},{"d",""},{"e",""},{"f",""},
		{"g",""},{"h",""},{"i",""},{"j",""},{"k",""},{"l",""},{"m",""},{"n",""},
		{"o",""},{"p",""},{"q",""},{"r",""},{"s",""},{"t",""},{"u",""},{"v",""},
		{"w",""},{"x",""},{"y",""},{"z",""},{"0",""},{"1",""},{"2",""},{"3",""},
		{"4",""},{"5",""},{"6",""},{"7",""},{"8",""},{"9",""},{"+",""},{"/",""},
		{".",""},{",",""}
	} do
		-- find stringin64 and replace with stringin8
		final_string = string.gsub(final_string,stringin64,stringin8)
	end
	-- TODO: convert above to fully base 8 if after the decimal point
	return final_string
end

return r
Retrieved from "https://mc.nguh.org/w/index.php?title=Module:Radix&oldid=43336"